SMART POWER SWITCH 20A
An intelligent energy management system that optimises electronic appliances when electricity is drawn from the utility(wall outlet), the battery or the solar panels.
Read MoreIP54 6V12V 24V BATTERY CHARGER
WCS-15000
IP54 6V5A 12V15A 24V7.5A AC to DC 3-in-1 Intelligent Battery Charger
WCS-15000 Battery Charger
6V5A-12V15A-24V7.5A battery charger. IP54 water splash resistant housing. For all kind of 6V/12V/24V vehicles and motobikes. 300 seconds fast charging, 8 Steps of optimization chargings.
Description
8 Charging stages: Diagnosis, Desulphation, Soft-Start, Bulk, Absorption, Analyze, Recond, Float. Harsh-weather-beaten housing, energy-saving design. Microchip-controlled intuitively self-detect battery's condition and adjust the charging status automatically to optimize the best charging experience. Reversed polarity, sparks, over-charging, over-current, open-circuits, short-circuits, and overheating protections. Memory mode allows user to return to the last selected mode when restart the device. IP54 class splash, dirt, UV, impact, and shock resistant.
Features
- DIAGNOSIS: The WCS-15000 charger will first check the battery is in a good condition or not, charging will not start if a battery is below 1.5V.
- DESULPHATION: Remove sulphates from the lead plates between the battery cells and restores battery's capacity.
- SOFT-START: Begin charging the target battery by gradually raises the voltage and current.
- BULK: Works the battery thourgh the pulse, gives the battery a constant current bring it up to 80% of the battery's capacaity.
- ABSORPTION: Gives the battery a gradually rising voltage while the current relatively reduces until its fully charged.
- ANALYZE(CHECK): Battery will be checked again to ensure it is properly functioning to be used or not.
- RECOND: Reconditioning funciton, work up the battery at a slightly higer voltage and amperage to reactivate the battery cells to improve the depth of charge.
- FLOAT: By provide a constant voltage charge to let it stay at maximum level, maintains the voltage of the battery at 95%-99%, keep it under control.
Applications
- Car, bus, pick-up truck, motorcycle, sledge, yacht, ATV, RV, caravan
Gallery
Specification
| MODEL NO. | WCS-15000 | |
|---|---|---|
| Kind of battery | All types Lead-acid batteries | |
| AC input | 230Vac ± 15% selectable | |
| Efficiency | >85% | |
| Battery Voltage | DC 6V/12V/24V+/-0.5V | |
| Current | 5A/15A/7.5A | |
| Protections | ||
| Sparks | ||
| Over-charging | ||
| Over-current | ||
| Open-circuits | ||
| Short-circuits | ||
| Over-heating | ||
| Battery Capacity | 50Ah to 400Ah(12V), 25-200Ah(24V) | |
| Dimensions | 207mm*125mm*43.7mm | |
| Weights | 1.5kgs | |
- Related Products
IP20 12V 24V LCD LEAD-ACID BATTERY CHARGER
WCR-40
Full-automatic Charging Cycle. IP20 housing. LCD Display. For WET/MF/EFB/GEL/AGM batteries of all kind of 12V & 24V vehicles and motobikes. 300 seconds boost charging, 8 Steps of optimization chargings.
IP65 4A 12V LCD BATTERY CHARGER
WBL-4A12V
The product package includes the cables with 10A Fuse, the 18 gauge copper wire, SAE 2-Pin quick disconnect plug to O Ring terminal harness; Alligator Clips to SAE 2-Pin Quick Disconnect plug; SAE 2-Pin Quick Connector Single Plug. Various charging status indications: low battery, exhausted battery saving, normal; Different charging mode selections: AGM, STD, Winter, Maintain, Power Supply, and Recond. Winter mode is recommended charging in cold weather.
IP65 6A 12V LCD BATTERY CHARGER
WBL-6A12V
The product package includes the cables with 10A Fuse, the 18 gauge copper wire, SAE 2-Pin quick disconnect plug to O Ring terminal harness; Alligator Clips to SAE 2-Pin Quick Disconnect plug; SAE 2-Pin Quick Connector Single Plug. Various charging status indications: low battery, exhausted battery saving, normal; Different charging mode selections: AGM, STD, Winter, Maintain, Power Supply, and Recond. Winter mode is recommended charging in cold weather.
IP65 10A 12V LCD BATTERY CHARGER
WBL-10A12V
The product package includes the cables with 10A Fuse, the 18 gauge copper wire, SAE 2-Pin quick disconnect plug to O Ring terminal harness; Alligator Clips to SAE 2-Pin Quick Disconnect plug; SAE 2-Pin Quick Connector Single Plug. Various charging status indications: low battery, exhausted battery saving, normal; Different charging mode selections: AGM, STD, Winter, Maintain, Power Supply, and Recond. Winter mode is recommended charging in cold weather.
New Products
PSW LCD Pure Sine Wave Power Inverter with APP
Power saving mode, optional LCD display, AC transfer switch, etc. Well tried-and-tested devices perfectly designed for all vehicles. Can now download our App to use,...
Read More
Auto Roof Racks & Oven Door Handles
OEM Auto Parts. Certified with IATF 16949:2016 standards. Reliability tests based on ASTM Standards.
Read More