600W LCD SMART PURE SINE WAVE POWER INVERTER

600W LCD SMART PURE SINE WAVE POWER INVERTER

WINVPA6

600W Off-grid LCD display smart pure sine wave inverter for 12V Car battery

600W Intelligent smart pure sine wave inverter
600W Intelligent smart pure sine wave inverter
PSW 600W Features
PSW 600W Features

One Main 230VAC outlet. The inverter can be configured by entering the setup mode: Output Voltage, Last Error Code, Battery Size, Power Saving, Low Voltage Cut-off, and Output Frequency. Several Indicator & Error modes for the inverter's protection shown on the LCD Display. LCD Display & Frame Kit. When choose to connect the inverter with 230 AC socket, one IEC outlet socket is provided and a residual current device( RCD) should trip to prevent an electric shock. MOQ is 100-500PCS, production time 60 days.

PSW Display
PSW Display

Description

Switching On
1. Ensure that the inverter power on/off switch is in the OFF (0) position.
2. Plug the appliance into the AC output socket on the inverter, ensuring it does not exceed the maximum output power of the inverter.
3. Turn the power on/off switch to the ON (I) position.
4. The Power indicator will illuminate green and mains power will be available from the AC output socket(s). On models fitted with a display the LCD screen will also illuminate.

PSW Inverter's SLEEP MODE will activate in 10 min without any input while turning on.

LCD Information Mode

PSW Inverter LCD Set Up Mode Description

To enter Setup Mode press & hold the Select key. Press Up / Down keys to select item, then press Select, chosen setting will then flash. Adjust setting by using Up / Down keys then press Select to set. Long press the Select key to exit back to Information Mode.

PSW Inverter LCD Set Up Mode Description

PSW Inverter LCD Set Up Mode Description

PSW Inverter LCD Error Code

PSW Inverter LCD Error Code Descriptions

Current Sensor Installation (optional): To enable monitoring of the input current and hours remaining function, hours remaing function is an estimate of time remaining before the battery will be depleted based on the current load. The optional current sensor can should be fitted as shown in the figure.

AC Transfer Switch: When the “AC INPUT” at the real panel is connected, the unit will switch to external current supply automatically, the power that is discharged from the battery will halt. Its status will be indicated by 3 (Green-Red-Yellow) light-emitting diode (LED), flashing every 2 seconds. As long as the main voltage is supplied, the inverter can not be restarted. AC transfer time < 0.1s.

Features

  • An LCD display can also be added to models without this function by using the optional LCD Display & Frame Kit (WINVLCD). Connect 6 metre extension lead to display port J on inverter. Fit frame where display is required and attach 6 metre cable to the rear. Snap on to fit endplates for covering screws. Turn the power on/off switch to the ON (I) position. Inverter can now be controlled remotely from the LCD display.

Applications

  • Model: WINVPA6/WINVPB6
  • Voltage: 12V/24V
  • Current Power Rating (up to 12 hrs): 600W
  • Peak Power Rating (up to 200ms): 1200W
  • Output Voltage: 200V/220/230/240V AC ±10%
  • Output Frequency: 50/60Hz
  • Input Voltage Range: 9.5V-16.5V(12V nom)//19-33V(24V nom)
  • Input Current: 59Amp/29.5Amp (max)
  • Efficiency @ 75% load: 90%
  • No Load Current: <1.5Amp
  • Power Saving Mode Current: <0.3Amp
  • RCD Tripping Current: 30mA
  • Low Battery Alarm: 10.0V~11.5V±0.5V/20.0~23.0V±0.5V
  • Low Battery Shutdown: 9.5V~11.0V±0.5V/19.0~22.0V±0.5V
  • Thermal Protection: 60 ±10°C
  • USB Port: 2.1Amp
  • Dimensions(L*W*H): 340*170*81.5mm
  • Weight: 2.8kgs
  • Optional Parts: LCD display & frame kit, current sensor

Gallery

Videos


Related Products
  • 600W PURE SINE WAVE POWER INVERTER for 12V CAR BATTERY - INT Pure Sine Wave Power Inverter 600W
    600W PURE SINE WAVE POWER INVERTER for 12V CAR BATTERY
    INT-600W 12V

    MOQ 100-300 PICS. UL and CE certified. Better for retailers, distributors, importers, wholesalers, and manufacturers. Lead-time is 60 days. With UL Approved GFCI socket. Ideal for retailers, distributors, importers, wholesalers, and manufacturers. Lead-time is 60 days.


  • 600W PURE SINE WAVE POWER INVERTER for 24V CAR BATTERY - INT Pure Sine Wave Power Inverter 600W
    600W PURE SINE WAVE POWER INVERTER for 24V CAR BATTERY
    INT-600W 24V

    MOQ 100-300 PICS. UL and CE certified. Apply input to 24V vehicle battery. Also provide UL Approved GFCI socket. Ideal for retailers, distributors, importers, wholesalers, and manufacturers. Lead-time is 60 days.


  • 1000W LCD SMART PURE SINE WAVE POWER INVERTER - 1000W Intelligent smart setting pure sine wave inverter with mounting LCD display board
    1000W LCD SMART PURE SINE WAVE POWER INVERTER
    WINVPA10 / WINVPB10

    Two 230VAC Outlets. The inverter can be configured by entering the setup mode: Output Voltage, RCD Test, Last Error Code, Battery Size, Power Saving, Low Voltage Cut-off, and Output Frequency. RCD Test is to test the earth leakage protection function is working correctly. Several Indicator & Error modes shown on the LCD Display. Feature one USB and Comms port. Mounting LCD Display. When choose to connect the inverter with 230 AC socket, one IEC outlet socket is provided, a RCD should trip to prevent an electric shock. MOQ is 100-500PCS, production time 60 days.


  • 1500W LCD SMART PURE SINE WAVE POWER INVERTER - 1500W Intelligent smart setting pure sine wave inverter with mounting LCD display board
    1500W LCD SMART PURE SINE WAVE POWER INVERTER
    WINVPA15 / WINVPB15

    Two 230VAC Outlets. The inverter can be configured by entering the setup mode: Output Voltage, RCD Test, Last Error Code, Battery Size, Power Saving, Low Voltage Cut-off, and Output Frequency. RCD Test is to test the earth leakage protection function is working correctly. Several Indicator & Error modes shown on the LCD Display. Feature one USB and Comms port. Mounting LCD Display. When choose to connect the inverter with 230 AC socket, one IEC outlet socket is provided, a RCD should trip to prevent an electric shock. MOQ is 100-500PCS, production time 60 days.


  • 2000W LCD SMART PURE SINE WAVE POWER INVERTER - 2000W Intelligent smart setting pure sine wave inverter with mounting LCD display board
    2000W LCD SMART PURE SINE WAVE POWER INVERTER
    WINVPA20 /WINVPB20

    Two 230VAC Outlets. The inverter can be configured by entering the setup mode: Output Voltage, RCD Test, Last Error Code, Battery Size, Power Saving, Low Voltage Cut-off, and Output Frequency. RCD Test is to test the earth leakage protection function is working correctly. Several Indicator & Error modes shown on the LCD Display. Feature one USB and Comms port. Mounting LCD Display. When choose to connect the inverter with 230 AC socket, one IEC outlet socket is provided and a RCD should trip to prevent an electric shock. MOQ is 100-500PCS, production time 60 days.



  • Tag
  • 600W off-grid digital display pure sine inverter
  • 600W LCD display pure sine wave power inverter
  • 600W LCD true sine wave power inverter
  • 600W DC/AC LCD True sine wave power inverter
  • 600W DC to AC pure sine wave power inverter.


New Products

PSW LCD 600W PURE SINE WAVE POWER INVERTER

PSW LCD 600W PURE SINE WAVE POWER INVERTER

Power Saving mode, optional LCD board display kit, AC transfer switch and more. Modern housing design to mechanically reduce unnecessary heat waste, exceptional microchip...

Read More
PSW LCD 1000W PURE SINE WAVE POWER INVERTER

PSW LCD 1000W PURE SINE WAVE POWER INVERTER

Power saving mode, optional LCD board display, AC transfer switch, and more. A well tried-and-tested device which can be widely used in non-commercial and commercial...

Read More
PSW LCD 2000W PURE SINE WAVE POWER INVERTER

PSW LCD 2000W PURE SINE WAVE POWER INVERTER

Power saving mode, optional LCD board display, AC transfer switch, and more. A beautifully design device which can be early installed in larger non-commercial and commercial...

Read More