1500W LCD display smart pure sine wave inverter12V30A or 24V15A DC to 220V AC with charger, Off-grid optional mounting detachable
PSC Inverter Charger1500W
Rocker Switch to swtich between Li-Ion or Lead-Acid battery useage. Even without LCD display (as remote control), users are able to control inverter through the App, providing flexibility. 4 LED Indications. Inverter's LED indicators: Power on/off, Thermal alarm, Overload shoutdown, and Charging status.
Charger's LED indications: In orange when charing is in progress; in green means charging completed. Two 230VAC outlets. Two models, 12V30A or 24V15A chargin current, AC bypass. LCD Display panel is detachable, functions are designed in modular: Output Voltage, Last Error Code, Battery Size, Power Saving(or Sleeping Mode), Low Voltage Cut-off, and Output Frequency.
Description
Indications & error codes are shown on the LCD Display. The Sleeping Mode will activate in 10 min without any input while turning on. Please note that the Smart App is only avaliable for the inverter's data at the moment, the charger's status will be indicated by LED. Feature one Comms port. Off-grid optional mounting detachable. Mounting LCD display frame with 6m cable. MOQ is 100-500PCS, production time 90-115 days.
LCD Display Panel Guide
Switching On:
Ensure that the inverter power on/off switch is in the OFF (0) position.
Connect source battery’s positive and negative leads by using the provided clamps with the unit’s terminals, make sure the polarities are accurate.
Plug the appliance into the AC output socket on the inverter, ensuring it does not exceed the maximum output power of the inverter.
Turn the power on/off switch to the ON (I) position.
The Power indicator will illuminate green and mains power will be available from the AC output socket(s). On models fitted with a display the LCD screen will also illuminate.
LCD Information Mode
To enter "Setup Mode", press & hold the "Select" key. Press Up / Down keys to select item, then press "Select", once choose the setting, the LCD screen will flash.
Adjust setting by using Up / Down keys then press "Select" to reset.
After reset, press long the "Select" key to exit back to "Information Mode".
PSW Inverter LCD Set Up Mode Description
PSW Inverter LCD Error Code
Current Sensor Installation (optional):
To enable monitoring of the input current and hours remaining function, hours remaing function is an estimate of time remaining before the battery will be depleted based on the current load. The optional current sensor can should be fitted as shown in the figure.
AC Transfer Switch:
When the “AC INPUT” at the real panel is connected, the unit will switch to external current supply automatically, the power that is discharged from the battery will halt. Its status will be indicated by 3 (Green-Red-Yellow) light-emitting diode (LED), flashing every 2 seconds. As long as the main voltage is supplied, the inverter can not be restarted. AC transfer time < 0.1s.
Specification
MODEL NO.
PSC1500
AC output voltage
230V± 10%
OUTPUT POWER(W)
CONTINUOUS 1500W. SURGE POWER 3000W
INPUT VOLTAGE
DC 12V or 24V
Battery Type
STD, AGM, GEL, LiFePO4, and Lithium-ion
Standby current
12V: <1.8A / 24V: <1.3A
Power Saving Mode Current
<0.3Amp
EFFICIENCY 75% LOAD
90% max.
OUTPUT REGULATION
Vac± 10%
OUTPUT FREQUENCY
50Hz or 60Hz re-setable
LOW BATTERY ALARM
10.0-11.5V 20.0V-23.0V
LOW BATTERY SHUTDOWN
9.5V-12.0V 19.0V-22.0V
OVER BATTERY SHUTDOWN
32± 1Vdc
THERMAL PROTECTION
60+10°C / 140+18°F
Input current
147A(max)
PROTECTIONS
Low battery alarm
Low battery shutdown
Over battery shutdown
Input polarity protection (by fuse)
Overload protection
Thermal protection
Out short circuit protection (by electronic circuit)
FUSE
15A*6pc
AC Charger
Input Voltage
220VAC
By Switch
DC Output for Lead-acid battery
Equalizing 14.4V/28.8V; Flat 13.8V/27.6V
DC Output for Li-ion battery
Equalizing 14.6V/29.2V
Charging current
Max 12V: 30Amp; 24V: 15Amp
AC Bypass
Transfer Time
<20ms
Input Voltage Wavefor
Sine Wave
Max bypass current
10A
Safety & EMC
Safety
LVD(EN62386)
EMC
CE(EN55032)
Working Environment
Operating Temp.
-20°C~50°F
Working Humidity
20-90%RH
Storage Temp.
-30°C-~70°F
DIMENSION(LxWxH)
450*247*100mm
NET WEIGHT
7.0kgs
Specification may subject to change based on customization, please contact us shall you have questions, thank you.
Rocker Switch to swtich between Li-Ion or Lead-Acid battery useage. Even without LCD display (as remote control), users are able to control inverter through the App, providing flexibility. 4 LED Indications. Inverter's LED indicators: Power on/off, Thermal alarm, Overload shoutdown, and Charging status.
Charger's LED indications: In orange when charing is in progress; in green means charging completed. Two 230VAC outlets. Two models, 12V30A or 24V15A chargin current, AC bypass. LCD Display panel is detachable, functions are designed in modular: Output Voltage, Last Error Code, Battery Size, Power Saving(or Sleeping Mode), Low Voltage Cut-off, and Output FrequencyP
Rocker Switch to swtich between Li-Ion or Lead-Acid battery useage. Even without LCD display (as remote control), users are able to control inverter through the App, providing flexibility. 4 LED Indications. Inverter's LED indicators: Power on/off, Thermal alarm, Overload shoutdown, and Charging status.
Charger's LED indications: In orange when charing is in progress; in green means charging completed. Two 230VAC outlets. Two models, 12V30A or 24V15A chargin current, AC bypass. LCD Display panel is detachable, functions are designed in modular: Output Voltage, Last Error Code, Battery Size, Power Saving(or Sleeping Mode), Low Voltage Cut-off, and Output Frequency.
Rocker Switch to swtich between Li-Ion or Lead-Acid battery useage. Even without LCD display (as remote control), users are able to control inverter through the App, providing flexibility. 4 LED Indications. Inverter's LED indicators: Power on/off, Thermal alarm, Overload shoutdown, and Charging status.
Charger's LED indications: In orange when charing is in progress; in green means charging completed. Two 230VAC outlets. Two models, 12V30A or 24V15A chargin current, AC bypass. LCD Display panel is detachable, functions are designed in modular: Output Voltage, Last Error Code, Battery Size, Power Saving(or Sleeping Mode), Low Voltage Cut-off, and Output Frequency.
Rocker Switch to swtich between Li-Ion or Lead-Acid battery useage. Even without LCD display (as remote control), users are able to control inverter through the App, providing flexibility. 4 LED Indications. Inverter's LED indicators: Power on/off, Thermal alarm, Overload shoutdown, and Charging status.
Charger's LED indications: In orange when charing is in progress; in green means charging completed. Two 230VAC outlets. Two models, 12V30A or 24V15A chargin current, AC bypass. LCD Display panel is detachable, functions are designed in modular: Output Voltage, Last Error Code, Battery Size, Power Saving(or Sleeping Mode), Low Voltage Cut-off, and Output Frequency.
48VDC to 110/220VAC Petite Pure sine wave Inverter with USB port & Aviation socket
Microchip controlled, BOU petite pure sine wave inverter 48 models are capabale of ≥88% of efficiency, <3% of transfer efficiency lost despite their reduced size....
Power saving mode, optional LCD display, AC transfer switch, etc. Well tried-and-tested devices perfectly designed for all vehicles. Can now download our App to use,...