600W LCD SMART PURE SINE WAVE POWER INVERTER 12V DC to 220V AC

600W LCD SMART PURE SINE WAVE POWER INVERTER 12V DC to 220V AC

WINVPA6

600W Off-grid LCD display smart pure sine wave inverter 12V DC to 220V AC

600W Intelligent smart pure sine wave inverter
600W Intelligent smart pure sine wave inverter

WENCHI's lastest PSW Pure Sine Wave Inverter series have pioneer engineering design that enable user to freely switch between differnt modes by LCD switch panel, the mothodically outlined housing inlusation dispatches unwanted heat.

Main 230VAC outlet. The inverter can be configured by entering the setup mode: Output Voltage, Last Error Code, Battery Size, Power Saving, Low Voltage Cut-off, and Output Frequency. Several Indicator & Error modes for the inverter's protection shown on the LCD Display. LCD Display & Frame Kit with 10m&6m cable, no cover is required. MOQ is 100-500PCS, production time 60 days.

Description

LCD Display Panel Guide: Switching On
1. Ensure that the inverter power on/off switch is in the OFF (0) position.
2. Connect source battery’s positive and negative leads by using the provided clamps with the unit’s terminals, make sure the polarities are accurate.
3. Plug the appliance into the AC output socket on the inverter, ensuring it does not exceed the maximum output power of the inverter.
4. Turn the power on/off switch to the ON (I) position.
5. The Power indicator will illuminate green and mains power will be available from the AC output socket(s). On models fitted with a display the LCD screen will also illuminate.

PSW Inverter's SLEEP MODE will activate in 10 min without any input while turning on.

Global Plugs

LCD Information Mode
PSW Inverter LCD Set Up Mode Description

To enter "Setup Mode", press & hold the "Select" key.
Press Up / Down keys to select item, then press "Select", once choose the setting, the LCD screen will flash.
Adjust setting by using Up / Down keys then press "Select" to reset.
After reset, press long the "Select" key to exit back to "Information Mode".

PSW Inverter LCD Set Up Mode Description

Set Up Mode Description

PSW Inverter LCD Error Code

PSW Inverter LCD Error Code Descriptions

Current Sensor Installation (optional):
To enable monitoring of the input current and hours remaining function, hours remaing function is an estimate of time remaining before the battery will be depleted based on the current load. The optional current sensor can should be fitted as shown in the figure.

Current Sensor Installation

AC Transfer Switch:
When the “AC INPUT” at the real panel is connected, the unit will switch to external current supply automatically, the power that is discharged from the battery will halt. Its status will be indicated by 3 (Green-Red-Yellow) light-emitting diode (LED), flashing every 2 seconds. As long as the main voltage is supplied, the inverter can not be restarted. AC transfer time < 0.1s.

Features

  • An LCD display can also be added to models without this function by using the optional LCD Display & Frame Kit (WINVLCD). Connect 6 metre extension lead to display port J on inverter. Fit frame where display is required and attach 6 metre cable to the rear. Snap on to fit endplates for covering screws. Turn the power on/off switch to the ON (I) position. Inverter can now be controlled remotely from the LCD display.

Applications

  • Model: WINVPA6/WINVPB6
  • Voltage: 12V/24V
  • Current Power Rating (up to 12 hrs): 600W
  • Peak Power Rating (up to 200ms): 1200W
  • Output Voltage: 200V/220/230/240V AC ±10%
  • Output Frequency: 50/60Hz
  • Input Voltage Range: 9.5V-16.5V(12V nom)//19-33V(24V nom)
  • Input Current: 59Amp/29.5Amp (max)
  • Efficiency @ 75% load: 90%
  • No Load Current: <1.5Amp
  • Power Saving Mode Current: <0.3Amp
  • RCD Tripping Current: 30mA
  • Low Battery Alarm: 10.0V~11.5V±0.5V/20.0~23.0V±0.5V
  • Low Battery Shutdown: 9.5V~11.0V±0.5V/19.0~22.0V±0.5V
  • Thermal Protection: 60 ±10°C
  • USB Port: 2.1Amp
  • Dimensions(L*W*H): 330*170*81.5, No RCD: 335*170*81.5
  • Weight: 2.8kgs
  • Optional Parts: LCD display & frame kit, current sensor

Gallery

Videos


Related Products
  • 600W PURE SINE WAVE POWER INVERTER 12V/24V DC to 115V/230V AC - INT Pure Sine Wave Power Inverter 600W
    600W PURE SINE WAVE POWER INVERTER 12V/24V DC to 115V/230V AC
    INT-600W

    MOQ 100-300 PICS. UL and CE certified. Better for retailers, distributors, importers, wholesalers, and manufacturers. Lead-time is 60 days. With UL Approved GFCI socket. Ideal for retailers, distributors, importers, wholesalers, and manufacturers. Lead-time is 60 days.


  • 1000W LCD SMART PURE SINE WAVE POWER INVERTER 12V DC to 220V AC - 1000W Intelligent smart setting pure sine wave inverter with mounting LCD display board
    1000W LCD SMART PURE SINE WAVE POWER INVERTER 12V DC to 220V AC
    WINVPA10 / WINVPB10

    Two 230VAC Outlets. The inverter can be configured by entering the setup mode: Output Voltage, RCD Test, Last Error Code, Battery Size, Power Saving, Low Voltage Cut-off, and Output Frequency. RCD Test is to test the earth leakage protection function is working correctly. Several Indicator & Error modes shown on the LCD Display. Feature one USB and Comms port. Mounting LCD display frame with 6m cable. When choose to connect the inverter with 230 AC socket, one IEC outlet socket is provided, a RCD should trip to prevent an electric shock. MOQ is 100-500PCS, production time 60 days.


  • 1500W LCD SMART PURE SINE WAVE POWER INVERTER 12V DC to 220V AC - 1500W Intelligent smart setting pure sine wave inverter with mounting LCD display board
    1500W LCD SMART PURE SINE WAVE POWER INVERTER 12V DC to 220V AC
    WINVPA15 / WINVPB15

    Two 230VAC Outlets. The inverter can be configured by entering the setup mode: Output Voltage, RCD Test, Last Error Code, Battery Size, Power Saving, Low Voltage Cut-off, and Output Frequency. RCD Test is to test the earth leakage protection function is working correctly. Several Indicator & Error modes shown on the LCD Display. Feature one USB and Comms port. Mounting LCD display frame with 6m cable. When choose to connect the inverter with 230 AC socket, one IEC outlet socket is provided, a RCD should trip to prevent an electric shock. MOQ is 100-500PCS, production time 60 days.


  • 2000W LCD SMART PURE SINE WAVE POWER INVERTER 12V DC to 220V AC - 2000W Intelligent smart setting pure sine wave inverter with mounting LCD display board
    2000W LCD SMART PURE SINE WAVE POWER INVERTER 12V DC to 220V AC
    WINVPA20 /WINVPB20

    Two 230VAC Outlets. The inverter can be configured by entering the setup mode: Output Voltage, RCD Test, Last Error Code, Battery Size, Power Saving, Low Voltage Cut-off, and Output Frequency. RCD Test is to test the earth leakage protection function is working correctly. Several Indicator & Error modes shown on the LCD Display. Feature one USB and Comms port. Mounting LCD display frame with 6m cable. When choose to connect the inverter with 230 AC socket, one IEC outlet socket is provided and a RCD should trip to prevent an electric shock. MOQ is 100-500PCS, production time 60 days.



  • Tag
  • 600W off-grid digital display pure sine inverter
  • 600W LCD display pure sine wave power inverter
  • 600W LCD true sine wave power inverter
  • 600W DC/AC LCD True sine wave power inverter
  • 600W DC to AC pure sine wave power inverter.


New Products

NMSW LCD MODIFIED SINE WAVE POWER INVERTER

NMSW LCD MODIFIED SINE WAVE POWER INVERTER

Power Saving Mode, optional LCD board display kit, AC transfer switch and more add-on kits, mechanically reduce unnecessary heat waste by design, and exceptional microchip...

Read More
PSW LCD PURE SINE WAVE POWER INVERTER

PSW LCD PURE SINE WAVE POWER INVERTER

Power saving mode, optional LCD board display, AC transfer switch, and more. A well tried-and-tested device which can be widely used in non-commercial and commercial...

Read More
IP65 WATER RESISTANT LCD SMART CHARGER

IP65 WATER RESISTANT LCD SMART CHARGER

LCD digital indication, designed to use in harsh cold weather. Can be applied as a a power supply for electronic devices. Unique RECOND mode to revive a deeply discharged...

Read More