3000W LCD MODIFIED SINE WAVE INVERTER 12V DC to 220V AC

Power Innovation & Save Energy For a Better Future!

3000W LCD MODIFIED SINE WAVE INVERTER 12V DC to 220V AC

NMSW-3000W

3000W Off-grid LCD Modified Sine Wave 12V DC to 220V AC Power Inverter

Wenchi NMSW LCD 3000W
Wenchi NMSW LCD 3000W
NMSW3000W rear
NMSW3000W rear

Digital display. Two 230VAC Outlets. Interactive setup mode: Output Voltage, RCD Test, Last Error Code, Battery Size, Power Saving, Low Voltage Cut-off, and Output Frequency.

Description

Mounting LCD display frame with 6m cable. Please note that LCD display can be mounted only for 3000W and 4000W models. RCD Test is to test the earth leakage protection function is working correctly. Several Indicator & Error modes shown on the LCD Display. Feature one USB and Comms port. NMSW Inverter's SLEEP MODE will activate in 10 min without any input while turning on. MOQ is 50-500PCS, production time 60 days. NMSW Inverter's SLEEP MODE will activate in 10 min without any input while turning on.

LCD Display Panel Guide:

    Switching On
  • 1. Ensure that the inverter power on/off switch is in the OFF (0) position.
  • 2. Connect source battery’s positive and negative leads by using the provided clamps with the unit’s terminals, make sure the polarities are accurate.
  • 3. Plug the appliance into the AC output socket on the inverter, ensuring it does not exceed the maximum output power of the inverter.
  • 4. Turn the power on/off switch to the ON (I) position.
  • 5. The Power indicator will illuminate green and mains power will be available from the AC output plugs(s). On models fitted with a display the LCD screen will also illuminate.
  • Global Plugs

    LCD Information Mode

    LCD Information Mode

    To enter "Setup Mode", press & hold the "Select" key.
    Press Up / Down keys to select item, then press "Select", once choose the setting, the LCD screen will flash.
    Adjust setting by using Up / Down keys then press "Select" to reset.
    After reset, press long the "Select" key to exit back to "Information Mode".

    NMSW Inverter LCD Error Code

    Error Code NMSW.jpg

    "The Last Error Codes" shows any previous error codes, "Battery Size" is to set the Ah rating of the battery, when a current sensor is installed and used conunctin with the this setting, the LCD display will also show an estimate of hours remaining.
    Current Sensor Installation (optional):
    To enable monitoring of the input current and hours remaining function, hours remaing function is an estimate of time remaining before the battery will be depleted based on the current load. The optional current sensor can should be fitted as shown in the figure.

    Current Sensor Installation

Applications

  • Cars, caravans, camping bus, truck, tracker, motorhome, upper mid range watts home appliances

Gallery

Specification

MODEL NO. NMSW-3000
Input Voltage (Vdc) 12 or 24Vdc
Frequency 50~60 Hz
Current 294A/147A
Output Continuous(W) 3000W
Surge(W) 6000W
AC output voltage(V) 220/230/240
Efficiency >89%
Thermal protection shut down 60 +/- 10 ℃ / 140 +/-18℉
No load current < 0.9A / <0.75A
Power saving mode Yes
Power saving mode current <0.2A
Re-setting mode Yes
Low battery alarm 10.5~11.5V / 21.0V~23.0V(+/-0.5V)
Low battery shut down 10.0V / 20.0V(+/-0.5V)
LCD display Yes
Current sensor port Yes
Dimensions(mm) 420mm*181mm*163mm
Weights(kgs) 7.8kgs

Specification may subject to change based on customization, please contact us shall you have questions, thank you.

Related Products



New Products

48V to 115V/230V Pure Sine Wave Inverter

48V to 115V/230V Pure Sine Wave Inverter

48VDC to 110/220VAC 600W-8000W Pure Sine Wave Inverter

Read More
PSW LCD Pure Sine Wave Power Inverter with APP

PSW LCD Pure Sine Wave Power Inverter with APP

Power saving mode, optional LCD display, AC transfer switch, etc. Well tried-and-tested devices perfectly designed for all vehicles. Can now download our App to use,...

Read More
Auto Roof Racks & Oven Door Handles

Auto Roof Racks & Oven Door Handles

OEM Auto Parts. Certified with IATF 16949:2016 standards. Reliability tests based on ASTM Standards.

Read More