ADVANCED MULTI-STAGE BATTERY CHARGER 12V10A

Power Innovation & Save Energy For a Better Future!

ADVANCED MULTI-STAGE BATTERY CHARGER 12V10A

WHMBC-1210S8

12V10A 8-Stage Multi Battery Charger

WENCHI 8 Stage 1210 MultiCharger
WENCHI 8 Stage 1210 MultiCharger
Outline and Charging curves
Outline and Charging curves

For GEL, Deep Cycle, AGM, and Calcium batteries. LEDs indicate type of battery and status. Lead-time 60 days. 1 year warranty

Description

8-Stage charging cycle: Pre-Charge, Soft-Start, Bulk, Absorption, Equalization, Analysis, Recondition, Float.
Recondition mode is used to dissolve sulfate crystals in battery that hasn't been used for a long time by sending out frequencies.
The 8-Stage Multi-Charger series are designed to optimize the battery charging cycle to deliver enhancing battery performance.
WHMBC chargers is optimal for retaining equipment memory when changing a vehicle battery, it can be operated as a power supply to run a 12V device.

Features

  • Connect the charger to a wall outlet correctly and firmly
  • Turn on the power switch
  • Please confirm if the battery type is correct or not. Press the MODE-button to select charging program
  • Turn off the power switch of charger
  • Connect the alligator clamps to battery leads (red clip--->positive lead; black clip--->negative lead)
  • Switch on the charger system again
  • The battery is under charging

Gallery

Specification

MODEL NO. WHMBC-1210
Input Voltage (Vac) 100-240VAC
Frequency 50~60 Hz
Power 172W/312VA
Output Voltage 12V(The nominal voltage)
Current 10A
Pre-charge 2.5A up to 11V
Soft-Start 5.0A up to 12V
Bulk 10A up to 14.1(GEL)
10A up to 14.4(AGM)
10A up to 14.7(Calcium)
Absorption C.V. drops to 1.7A
Equalization (Calcium mode only) C.C. 2.5A up to 16V/1.3A, then hold for 1 hour or time out (LED blinks)
Analysis Monitors battery for 90 secs (Intermittent flashing LED)
Recondition (LED blinks) C.C. 1.5A for 90 mins
Limited to 14.1V(GEL)
Limited to 14.4V(AGM)
Limited to 16.0V(Calcium)
Float 13.7V
PWR Supply Set Voltage 13.7V
Maximum Current 10A
BATTERY RANGE Deep Cycle 70~200Ah
Types of Batteries Most types of lead-acid batteries including GEL, AGM, and Calcium
Environment Operate Temperature 0~+40℃, 20~80% RH
Storage Temperature -40~+80℃, 10~95% RH
Safty&CE LVD EN60335-1&EN60335-2-29
EMI EN55014‐ 1(EMI)/EN55014‐ 2(EMS)
Accessories Alligator Clips/Micorphone XLR Connector
Cooling fan Speed controlled by 2 charging stage
Dimensions (mm) 167mm*103mm*50mm
Weights(kgs) 0.9kgs

Specification may subject to change based on customization, please contact us shall you have questions, thank you.

Related Products



New Products

48V to 115V/230V Pure Sine Wave Inverter

48V to 115V/230V Pure Sine Wave Inverter

48VDC to 110/220VAC 600W-8000W Pure Sine Wave Inverter

Read More
PSW LCD Pure Sine Wave Power Inverter with APP

PSW LCD Pure Sine Wave Power Inverter with APP

Power saving mode, optional LCD display, AC transfer switch, etc. Well tried-and-tested devices perfectly designed for all vehicles. Can now download our App to use,...

Read More
Auto Roof Racks & Oven Door Handles

Auto Roof Racks & Oven Door Handles

OEM Auto Parts. Certified with IATF 16949:2016 standards. Reliability tests based on ASTM Standards.

Read More